Looking for shower remodeling in Madison? Mississippi Pro serves Madison and all of Madison County with shower remodeling — this is our complete guide, plus a free design consultation at your Madison home.
Serving Madison from our showroom at 1138 Weems St, Pearl, MS
Free Design Consultation in MadisonCall (601) 376-9654Madison is one of the fastest-growing and most sought-after suburbs in the Jackson metro, in Madison County just north of the capital. Mississippi Pro proudly serves Madison homeowners and businesses. We handle the design, waterproofing, permits and construction under one roof. From established neighborhoods to new construction across Madison County, we know the area, we show up when we say we will, and we stand behind our work.
Our showroom and offices are at 1138 Weems Street in Pearl, and we cover Madison and the surrounding Jackson metro with free design consultations — no charge and no pressure.
Madison is the metro's upscale north end — communities like Reunion, with its golf and country club, set a high bar, and Madison's strict architectural standards mean finishes have to be right. That's where we shine: premium flooring, custom kitchens and baths, and roofing that meets HOA and neighborhood guidelines. From established homes near downtown Madison to new construction toward the Barnett Reservoir, we bring the showroom to you and match the quality Madison County expects.
We also serve nearby communities: Ridgeland, Canton, Flora, Gluckstadt.
From a quick, clean panel system to a fully custom tiled walk-in, here is what we do — and we handle every piece, from demo to the final glass.
Open, easy-to-enter showers in tile or panel systems, sized to your space.
Swap a rarely used tub for a spacious walk-in shower — our most requested project.
No threshold to step over — clean, modern and the safest to enter.
Fully tiled walls, floors, niches and benches, waterproofed the right way.
Keep a tub where it makes sense for family use and resale.
Frameless and semi-frameless glass, sliding doors and walk-in panels.
By far the most requested shower project is turning a tub nobody uses into a large, easy-to-enter walk-in shower. It opens the room up, is far safer to step into, and is dramatically easier to clean. We remove the old tub, reframe and re-plumb as needed, waterproof the new space correctly, and finish it in tile or a low-maintenance panel system. If it’s the only tub in the home, we’ll talk through resale first — many buyers want at least one tub in the house. There’s more on the whole room in our shower remodeling guide.
The wall and base system sets the look, the maintenance and the timeline. Here is how the main choices compare.
| System | What it is | What it means for you |
|---|---|---|
| Sentrel | A bath wall system in stone and tile looks, with matching bases, seats and accessories. | Warm, solid walls with no grout to keep; colours and a fold-down seat chosen as one set. |
| Wilsonart Wetwall | A waterproof wall panel system. Panels come 30, 36, 48 and 60 inches wide, 72 or 96 tall, with bullnose, tongue, groove or flat edges. | Edges are picked to suit the wall, so corners and returns finish clean. Colour-matched sealant, plus a 7×7 corner shelf and 8×12 or 10×15 niches. |
| Durasein solid surface | Solid surface shower walls — the same material family as a solid surface countertop. | Seamless, repairable, and there is no grout line anywhere to scrub. |
| Large-format porcelain | Porcelain in big sheets rather than small tiles. | A 32×60 shower can come down to three or four pieces on the walls — almost no grout to keep, and a very flat, quiet look. |
| Traditional tile | Tiled walls and floor over a waterproof membrane; any layout, size or pattern. | Most design freedom. We still build plenty of these, and we build them properly. |
| Acrylic surround and pan | Moulded walls and bases in set sizes. | Straightforward, hard-wearing and quick — the right answer on a lot of jobs. |
| Shower floor — mud bed or pan | A mud-bed tile floor sloped by hand, or a ready-made pan. | Mud bed = any size and shape, and the only way to a truly curbless floor. A pan = set sizes, fewer steps. |
We are not tied to one product, and we do not push one. Here is what each is good at, so you can tell us what matters to you — the look, the cleaning, or how long your bathroom is out of use.
A complete bath wall system — walls, base, seat and accessories designed to go together. Stone and tile looks without grout lines, and the fold-down seat and grab bars are part of the system rather than something added on afterwards. A good fit when you want the finished room to look considered and you do not want to think about grout again.
A waterproof panel system that goes on in large pieces. Panels run 30, 36, 48 and 60 inches wide in 72 and 96 inch heights, and the edges — bullnose, tongue, groove or flat — are chosen for where each panel lands, so a corner or a return finishes clean instead of being covered with trim. The sealant is matched to the panel colour, and there is a 7×7 corner shelf and two niche sizes, 8×12 and 10×15, in the same finish.
Solid surface — the same family of material as a solid surface countertop, made into shower walls and pans. It is seamless, it has no grout line anywhere, and it can be repaired rather than replaced if it is ever damaged. If the thing you hate about your current shower is cleaning the grout, this is the direct answer to it.
Porcelain, but in big sheets instead of small tiles. On a standard 32×60 shower the walls can come down to three or four pieces — so instead of a wall full of grout lines you have a nearly unbroken surface with a joint or two. It still reads as tile, because it is tile. It is simply far less of it to keep clean.
Plenty of people want a tiled shower and nothing else, and we build them. Any size, any pattern, any layout — over a properly waterproofed assembly, which is the part that decides whether a tile shower lasts twenty years or two. There is more on that in the waterproofing section below.
A shower floor packed and sloped by hand in mortar, rather than dropped in as a ready-made pan. It is the only way to tile a floor to a size and shape that is not off a shelf, and it is how a genuinely curbless, roll-in floor gets its fall to the drain. It takes longer and it takes somebody who has done it before.
A moulded base in a set size. Fast, hard-wearing and simple, and on a lot of jobs it is exactly the right call — particularly a straight tub-to-shower swap where the opening is already a standard size.
Not every job is a whole remodel. If what you need is a safer floor to stand on, we fit anti-slip and ADA shower pans on their own as a small project — a low or zero threshold, a textured surface with real grip underfoot, and a drain placed so the floor drains properly. Pair it with blocking in the walls and grab bars go wherever you need them later. Ask us; a job like this is usually a short one.
Most of the showers we tear out have the same problem: water got behind the tile. Tile and grout are not waterproof — water passes right through grout. In the old way of building a tile shower, the waterproof liner sits underneath the mortar floor, so the mortar soaks up water every time the shower runs and stays wet. That is where the soft floors, the musty smell, the mold and the rotted studs and subfloor come from. Moisture is the number-one problem we find in old showers.
We are a certified Schluter installer and a Schluter dealer, and every tile shower we build uses the complete Schluter shower system — all of their components, installed their way:
Because the waterproofing is on top of the mortar bed instead of buried under it, water stops at the surface. The mortar bed and the walls stay dry, and the shower dries out between uses. A shower built with the complete system qualifies for Schluter’s shower system warranty — something a mix-and-match shower can’t offer.
Sentrel and Wetwall panels are completely waterproof — water and vapor do not pass through them. That is exactly why what goes behind them matters. We install them over mold- and moisture-resistant drywall — our first choice is Gold Bond PURPLE XP, and CertainTeed M2Tech and ToughRock Mold-Guard work too — and we never put Schluter waterproofing or plastic behind the panels. Schluter is for our tile showers. If the wall ever gets damp — a small leak at a valve, or condensation from the hot-and-cold swings of a shower — it has to be able to dry out. Two waterproof layers with the wall in between would trap that moisture with nowhere to go — the “double vapor barrier” mistake building scientists warn about, especially in hot, humid climates like ours.
We also make sure the bathroom is vented with a fan to the outside. In Mississippi’s humidity, ventilation is what stops everyday steam from feeding mold.
If you are seeing any of these, call us before it spreads — the sooner a leak is found, the less there is to tear out.
The fittings are what make a shower feel like a retreat. We install quality valves and Moen fixtures and can add:
Whether you’re planning ahead or adapting now, a shower can be made far safer without looking clinical. We build these in seamlessly:
Planning for the long run? A barrier-free shower is usually step one of a bigger idea — staying in your home for good. See our plain-spoken guide to aging-in-place remodeling: widened doorways, no-step entries, grab bars done right, and a free whole-house assessment.
A shower remodel touches plumbing and waterproofing, so it must be done to code. Mississippi Pro holds Mississippi Contractor License #18725-MC, pulls the required permits, and schedules inspections. As one licensed design-build company, we are the single point of responsibility from demo to the last bead of sealant.
We quote every shower for your home, not off a chart. Your price comes down to the wall and base system you choose, the size and shape of the shower, the tile and fixtures, whether we move plumbing or go curbless, and the glass. We measure everything for free and give you one clear, itemized price — no guesswork.
| 1. Free design consultation | We look at your space, how you use it, and your goals — at home or our Pearl showroom. |
|---|---|
| 2. Measure & design | We measure exactly and lay out the shower, drain, niches and glass before anything is ordered. |
| 3. Selections | You choose the wall system, tile, base, fixtures and glass from real samples. |
| 4. Permits & schedule | We pull permits and give you a written schedule of each phase. |
| 5. Demo, waterproof & build | We protect the home, demo, waterproof correctly, then set the pan, tile and fixtures with proper cure time. |
| 6. Glass & final walkthrough | We install the glass, seal and test everything, clean up, and walk the finished shower with you. |
The right layout depends on your bathroom’s shape and how much you want it to open up. The most common options:
Set into a three-wall recess — the classic, space-efficient layout, often where a tub used to be.
Tucks into a corner with two finished walls and glass on the open sides — great for smaller baths.
Floor flows straight in with no threshold — the most open and accessible, with a linear drain.
A glass panel and smart layout let you skip the door entirely — airy and easy to clean.
The whole area is waterproofed so the shower and room share one open, spa-like space.
A well-built shower is easy to live with if you give it a little routine care:
A prefab or acrylic shower can be done in several days, while a fully custom tiled shower takes longer because waterproofing, tile setting and grout all need proper cure time. We never rush the waterproofing or the mortar. You get a written schedule before we start.
Yes - tub-to-shower conversions are one of our most requested projects. We remove the old tub, reframe and re-plumb as needed, waterproof correctly, and build a low-threshold or fully curbless walk-in shower in tile or a solid-surface system.
Yes. A curbless shower has no threshold to step over, which looks clean and modern and is far safer to enter. It takes extra work to slope the floor and set the drain correctly, and we build it with full waterproofing so there is no leak risk.
The waterproofing is everything, because tile and grout are not waterproof on their own. On tile showers we build a complete Schluter system - a sloped mortar bed, the Schluter KERDI-DRAIN and KERDI membrane bonded on top, every seam and corner sealed - and we leak test the pan before any tile goes down. Behind Sentrel and Wetwall panels we use mold- and moisture-resistant drywall, never a Schluter membrane or plastic, so the wall can dry. And we vent the bathroom with a fan to the outside.
The panels themselves are completely waterproof - water and vapor do not pass through them. If the wall behind them ever gets damp, from a small valve leak or from condensation, it needs a way to dry. A Schluter membrane or a plastic sheet behind a waterproof panel would make two waterproof layers with the wall trapped between them, so the moisture has nowhere to go - and that is how mold and rot start. Schluter is for our tile showers. Behind the panels we use mold- and moisture-resistant drywall - our first choice is Gold Bond PURPLE XP, and CertainTeed M2Tech and ToughRock Mold-Guard work too. It lets the wall dry out, and moisture-resistant board is one of the backings Wetwall itself calls for in wet areas.
Custom tile offers the most design freedom and a high-end look but needs proper waterproofing and grout care. Acrylic and solid-surface panel systems install faster, have few or no grout lines, and are very easy to clean. We carry all three and help you weigh looks, maintenance and budget.
Sometimes. Exact matches on older tile are not always possible, but we can often find a close match or design a complementary accent. We will show you honest options before you decide.
Yes. We build curbless entries, add solid blocking for grab bars, and install benches, hand-held shower heads, linear drains and non-slip floors so the shower is safe and comfortable for every stage of life.
Both. We install frameless and semi-frameless glass doors, sliding enclosures and fixed walk-in glass panels, or we can set the shower up for a curtain if you prefer. Frameless glass makes the bathroom feel larger and shows off the tile.
We’ll come to your Madison home or you can visit our showroom at 1138 Weems Street, Pearl. Free design consultations across Madison County and the Jackson metro.
Book a Free Design ConsultationCall (601) 376-9654